How to use DST hot-melt powder TF-HPDST-80
1. Sprinkle and spread it evenly over the DST transfer print while the ink is still wet.
2. Pour powder that did not stick to the wet ink into a tray to reuse, and tap off any powder left on the film where there is no wet ink.
3. Once all the loose powder is removed, bake or heat it until the powder melts and bonds to the print.
4. When the print is fully dry, cut the transfers apart, place the powdered side on the fabric and press at 125°C for 12 seconds.
5. Peel the transfer film after the print has cooled.
Tips
Use only for DST transfer work.
1. Sprinkle and spread it evenly over the DST transfer print while the ink is still wet.
2. Pour powder that did not stick to the wet ink into a tray to reuse, and tap off any powder left on the film where there is no wet ink.
3. Once all the loose powder is removed, bake or heat it until the powder melts and bonds to the print.
4. When the print is fully dry, cut the transfers apart, place the powdered side on the fabric and press at 125°C for 12 seconds.
5. Peel the transfer film after the print has cooled.
Tips
Use only for DST transfer work.
