{"product_id":"กาวทาโต๊ะแบบน้ำ-table-adhesive-spray-apt-101ha","title":"Water Based Platen Adhesive APT-101HA","description":"\u003cp\u003e\u003cu\u003eHow to use platen adhesive \u003c\/u\u003e\u003cu\u003eAPT-101HA\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003eA water based chemical adhesive, milky white. Spread it on the surface of your T-shirt printing platen\u003c\/p\u003e\n\u003cp\u003eto stop the shirt moving out of the print position.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eHow to use \u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e1. Apply the adhesive to the platen or printing table and spread it evenly with a scrap of cloth. Apply a thin coat.\u003c\/p\u003e\n\u003cp\u003e2. Dry it completely with a heat gun, a fan or a flash dryer. When fully dry,\u003c\/p\u003e\n\u003cp\u003ethis adhesive turns tacky like sticker glue. Once it is dry, lay down the item you want to print.\u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eMore tips\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e1. After a while, when the platen adhesive is no longer tacky, wipe off dirt with a damp, well-wrung cloth,\u003c\/p\u003e\n\u003cp\u003esuch as lint and ink residue, and the adhesive may become tacky again.\u003c\/p\u003e\n\u003cp\u003e2. When the adhesive on the table or platen is worn out and you want to remove it,\u003c\/p\u003e\n\u003cp\u003ewipe it off with old platen adhesive remover AC-662D.\u003c\/p\u003e\n\u003cp\u003e3. This adhesive can be thinned with a little water only. If you add too much water,\u003c\/p\u003e\n\u003cp\u003eyou will need a thicker coat or more than one coat.\u003c\/p\u003e","brand":"SK Screen Printing Supplies","offers":[{"title":"1 can","offer_id":29502308155503,"sku":"APT-102HA","price":139.0,"currency_code":"THB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0012\/8660\/2863\/products\/fa175bc2b6c5151058d2c53f16a61aa0.png?v=1566584484","url":"https:\/\/www.skscreenprintingsupply.com\/en\/products\/water-based-platen-adhesive-apt-101ha","provider":"SK Screen Printing Supplies","version":"1.0","type":"link"}