How to use platen adhesive APT-101HA
A water based chemical adhesive, milky white. Spread it on the surface of your T-shirt printing platen
to stop the shirt moving out of the print position.
How to use
1. Apply the adhesive to the platen or printing table and spread it evenly with a scrap of cloth. Apply a thin coat.
2. Dry it completely with a heat gun, a fan or a flash dryer. When fully dry,
this adhesive turns tacky like sticker glue. Once it is dry, lay down the item you want to print.
More tips
1. After a while, when the platen adhesive is no longer tacky, wipe off dirt with a damp, well-wrung cloth,
such as lint and ink residue, and the adhesive may become tacky again.
2. When the adhesive on the table or platen is worn out and you want to remove it,
wipe it off with old platen adhesive remover AC-662D.
3. This adhesive can be thinned with a little water only. If you add too much water,
you will need a thicker coat or more than one coat.
